Water Treatment
Cleaning System
Home / Injecta / Water Treatment / Nexus Series / NX.6000 S
INDUSTRIAL INSTRUMENTS
THE NEXUS.6000 SERIES DEVELOPED FOR WATER TREATMENT AND INDUSTRY, ALLOW THE MEASURING OF: pH/REDOX, CONDUCTIVITY, TURBIDITY, CHLORINE, OXYGEN
2 ANALOGUE OUTPUTS output 1 programmable for measure, output 2 programmable for measure/temperature/PID regulation, outputs limits are freely programmable between the range of measures
4 DIGITAL OUTPUTS on/off set point: set of the operating range (hysteresis /direction) and of start/stop time 000÷999 sec
PID REGULATION pulse frequency or PWM (2 set point)
ALARM reporting: instrumental anomalies, minimum, maximum, set point delay, permanence time (Live Check)
ELECTRODES WASHING programming of the time leg, frequency: 00:00÷24:00 hh:mm, minimum time leg: programmable, during the washing phase, all digital and analogue outputs are freezed
WATERPROOF VERSION 144x144x120 mm
-
DATA STORAGE INTERNAL FLASH 4 MB MEMORY (NEAR TO 16.000 RECORDS)
-
DIGITAL INPUT TO DISABLE DOSAGE
-
RS485 SERIAL INPUT FOR SET UP AND REAL TIME DATA ACQUISITION FROM REMOTE OR FOR STORED DATA DOWNLOAD (using a dedicate SW), USB TO DOWNLOAD (software required) MODBUS RTU COMMUNICATION PROTOCOL
-
MANUAL CONTROLS POSSIBILITY TO SIMULATE ALL THE ANALOGUE AND DIGITAL PUTPUTS USING THE KEYBOARD
-
TEMPERATURE COMPENSATION VIA TEMPERATURE SENSOR PT100 WITH 3 OR 4 WIRES, OR PT1000
-
128x64 PIXEL GRAPHIC DISPLAY, BACK LIGHTED
-
VISUALIZATION SIMULTANEOUS VALUES OF THE MEASURE (NUMERIC+BARGRAPH) AND TEMPERATURE, ANALOGUE OUTPUTS VALUE IN SCROLLING, GRAPHIC ICONS SHOWING: DIGITAL OUTPUTS STATE, DATA STORAGE, WASHING CYCLE, ALARMS